ALAT UKUR FLUIDA BERBASIS MIKROKONTROLER UNTUK MENINGKATKAN EFISIENSI WAKTU DAN KETELITIAN TAKARAN PEDAGANG MINYAK
Abstract
In general, oil traders use manual measuring cups or scales to sell oil, the process also takes a long time and the dose is less exact, so it requires a tool that can improve the efficiency of time and accuracy of measurements according to consumer demand. For this we need a tool that can work automatically and so that measurement accuracy and time are more efficient. Micro controller-based automatic fluid measuring devices have been given a program to control the work of this tool, data input commands from the keypad will be received by the micro controller. The next step micro controller will give output to the LCD, in the form of the desired nominal or the desired fluid volume and the micro controller will give an ON signal to cause the solenoid valve and pump, so that water flows, flowing water will be detected by flow sensors. Flow sensor output in the form of a pulse signal that is processed by the micro controller into a counter that is displayed on the LCD. When reaching the selected volume, the micro controller will give an OFF signal to the solenoid valve so that the oil stops flowing. This automatic fluid measuring device has a futuristic design, can be moved around because it has a light weight and easy to use.
Â
Â
Full Text:
PDFReferences
Saputra, M.A., Analisis Mesin Filling Minyak Goreng Berbasis Plc Menggunakan Metode Penakar Dan Timer Untuk Meningkatkan Efisiensi.
FAJAR, G., 2014. Rancang Bangun Prototipe Spbu-Mini Berbasis Mikrokontroler Atmega8535 Dengan Keluaran Berdasarkan Nilai Masukan Dalam Rupiah (Doctoral dissertation, UNIVERSITAS ANDALAS).
Gultom, I.P., 2017. Rancang Bangun Prototipe SPBU-Mini Berbasis Mikrokontroler ATMega8535 dengan Keluaran Berdasarkan Nilai Masukan dalam Rupiah.
Siregar, K.T., Tamba, T., Perangin-angin, B., USU, M.F.F. and USU, D.F.F., 2013. Viskosimeter Digital Menggunakan Water Flow Sensor G1/2 Berbasis Mikrokontroler 8535. Jurnal Saintia Fisika, 4(1), pp.1-6.
Hidayat, N., 2013, Solidworks 3D Drafting and Design, Informatika, Bandung
Shigley, J. E., Mitchell, L.D., dan Harahap, G., 1984, Perencanaan Teknik Mesin, PT.Glora Aksara Pratama, Jakarta
Sulistiadji, K., dan Pitoyo, J., 2009, Alat Ukur dan Instrumen Ukur, BBP Mektan, Serpong
Streeter, V.L., Wylie, E.B., dan Prijono, A., 1985, Mekanika Fluida, Erlangga, Ja
DOI: http://dx.doi.org/10.31949/j-ensitec.v6i02.2344
Refbacks
- There are currently no refbacks.
Copyright (c) 2020 J-ENSITEC
![Creative Commons License](http://i.creativecommons.org/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Engineering and Sustainable Technology (J-ENSITEC) Published by Fakultas Teknik Universitas Majalengka (Print ISSN : 2407-6007 and Online ISSN: 2477-359X)
Â
Visitor Number : | ![]() This work is licensed under a Creative Commons Attribution 4.0 International License. |