PERANCANGAN MESIN HONEY EXTRACTOR DENGAN SISTEM PENGGERAK MENGGUNAKAN MOTOR LISTRIK ¼ PHASA
Abstract
Honey extractor machine is a machine used to separate honey from honeycomb and make it easier for honey farmers to harvest honey. The purpose of this research is to design a honey exractor machine using ¼ phase electricity and design an engine frame design that is able to withstand static loads. Components used in the design of the honey extractor machine are electric motors, main frames, bearings, tubes, pulleys, belts, and shafts.
The software used to test the load that occurs is Solidworks Software 2013. The safety factor of the honey extractor machine is said to be safe because it has exceeded the minimum limit and the results of testing using software for safety factors are obtained 2.57
The stages in the design are designing a honey extractor machine frame, designing a honey storage tube, and designing the whole component assembly. The components in the honey extractor machine consist of a frame to support a load of 20 kg, a honey extractor storage tube, bearing, shaft with a diameter of 20 mm, electric motor motor power of 135 watts with a 1500 rpm engine speed, pulley using a large pulley 100 mm in diameter Small pulleys of 50 mm and v-belts with standard belt types can connect power of 135 watts
Kata Kunci : Perancangan, Honey extractor, Solidworks.
Full Text:
PDFReferences
Dharmawan, 1999. Menggambar Mesin menurut standar ISO, PT Pradnya Paramita, Jakarta.
Hermawan. 2017. Perancangan Ulang Alat pemeras Madu. Jurnal Sains, Teknologi dan Industri, Vol. 12, No. 1, Desember 2014, pp. 16 – 22
Heinz Rick, 1979. Mekanika Teknik 2 Statika dan Kegunaanya. Yogyakarta : Kanisius
Mumu Komara, 2008. Machine Design : Theory and Practice. New York : Macmillan Publishing Co., Inc.
Nuziliya Khoriyah, 2013. Mechanical Engineering Design. Fifth Edition.
R Triantoko, 2015. Structural Analysis. An Unified Classical and Matrix. http://ronggosix.blogspot.co.id
Sularso, 1994. Dasar Perencanaan dan. Pemilihan Elemen Mesin, Cetakan ke 10.
DOI: http://dx.doi.org/10.31949/j-ensitec.v5i01.1215
Refbacks
- There are currently no refbacks.
Copyright (c) 2019 J-ENSITEC
![Creative Commons License](http://i.creativecommons.org/l/by-sa/4.0/88x31.png)
This work is licensed under a Creative Commons Attribution-ShareAlike 4.0 International License.
Journal of Engineering and Sustainable Technology (J-ENSITEC) Published by Fakultas Teknik Universitas Majalengka (Print ISSN : 2407-6007 and Online ISSN: 2477-359X)
Â
Visitor Number : | ![]() This work is licensed under a Creative Commons Attribution 4.0 International License. |